|
|
| Maximum 2110 TM S Modulator with satellite FTA transmodulator |
|
| Product id: 8175 |
|
| |
|
|
|
| PRODUCT DESCRIPTION |
| The Maximum 2110 TM S DVB QAM Modulator, which combines QPSK demodulator, DVB TS PID Filter and digital cable QAM (DVB-C) modulator in a single unit. It supports 3 input modes, including QPSK signal from satellite, ASI and SPI (LVDS) input, and then transmodulates the input signal to digital QAM signal. It also supports 3 output modes, including DVB-ASI output, RF output and DS3 (optional) output. 2110 TM S adapts Ethernet WEB Management interface complying with HTTP protocol, which allows real-time status monitoring and control. It can obtain the PSI/SI information coming from each input port and multiplex them up to 1 TS with PCR Error Correction. 2110 TM S can also be called Multi-protocol TS Processor and QAM transmodulator. It is mainly applied to transmitting DVB-C signal in HFC, MMDS and MUDS systems. |
 |
| FEATURES |
| • |
Fully comply with DVB-S / ETSI 300421 and DVB-C / ETSI 300429 standard |
| • |
PBI Ethernet WEB Management Interface (Compatible with SNMP) |
| • |
Fully comply with the CATV professional design |
| • |
QPSK, ASI, SPI, DS3 input mode supported |
| • |
QPSK, ASI, SPI, DS3 loop through output |
| • |
DVB TS processing and re-multiplexing |
| • |
TS frequency range: 1 Mbit/s~54 Mbit/s |
| • |
The QAM modulation chosen among 16, 32, 64, 128 and 256 level numbers |
| • |
QAM symbol rate: 3.5~7.10 Bauds |
| • |
Output full frequency (48~860 MHz) RF CATV signal |
| • |
RF signal output level: 100~113 dB (adjustable) |
| • |
User friendly operation interface through LCD monitor |
| • |
Automatic last channel memory |
| • |
Store up to 99 channel parameters |
| • |
1U, 19" standard rack installation |
|
|
| TECHNICAL SPECIFICATIONS |
|
| QPSK demodulation |
Input frequency range: 950 ~ 2150 MHz |
|
Input level: -65 dBm ~ -25 dBm |
|
Connector: F connector |
|
Input impedance: 75 Ω |
|
Symbol rate: 2 ~ 45 MBauds |
|
Rolling off factor: 0,35 |
|
Punctured rates: 1/2, 2/3, 3/4, 5/6, 7/8 |
|
De-Interleaving: I = 12 |
|
Polarization selection: 0 / 13 V / 18 V switch |
|
Hi band Low band selection: 0 / 22 KHz on/off switch |
|
| QAM modulation |
QAM mode: 16, 32, 64, 128, 256 QAM |
|
Input bit rate: 1 ~ 7 Mbps (PAL), 1 ~ 6 Mbps (NTSC) |
|
Bandwidth: 6, 7 or 8 MHz |
|
FEC code rate: 1/2, 2/3, 3/4, 5/6, 7/8; K=7 |
|
| Input/Output |
Input frequency: 50 ~ 860 MHz |
|
Input level: -15 ~ 15 dBmV |
|
Input impedance: 75 Ω, F type |
|
RF connection: 75 Ω, F-connector |
|
Output level: 100 ~ 113 dB adjustable |
|
RF harmonics and spurious: > 60 dBc |
|
Output return loss: = 14 dB |
|
| Input TS |
ASI |
|
Connector: 75 Ω, BNC |
|
Data rate: 270 Mb/s |
|
Available bit rate: 1 M ~ 54 Mb/s |
|
Data mode: BYTE or BURST |
|
Packet length: 188 / 204 bytes |
|
Signal level: 800 mV |
|
Return loss: > 10 dB |
|
SPI |
|
Connector: 25 pin sub-D female |
|
Data rate: 1 M ~ 54 Mb/s |
|
Packet length: 188 / 204 bytes |
|
Signal level: 0,25 ~ 0,45 V |
|
| Output TS |
ASI |
|
Connector: 75 Ω, BNC |
|
Data rate: 270 Mb/s |
|
Available bit rate: 1 M ~ 54 Mb/s |
|
Data mode: BYTE or BURST |
|
Packet length: 188 / 204 bytes |
|
Signal level: 800 mV |
|
Return loss: > 10 dB |
|
| General |
Operating temperature: 0 ~ 45° C |
|
Storage temperature: -20 ~ 70° C |
|
Humidity: < 85 % |
|
Power supply: AC 90 V ~ 260 V 50/60 Hz, 45 W |
|
Weight: 6 kg |
|
|