|
|
| Maximum CI 2010T COFDM receiver with CI and ASI output |
|
| Product id: 8141 |
|
| |
|
|
|
| PRODUCT DESCRIPTION |
| Maximum CI 2010T series are high performance-to-price ratio IRDs. User may insert up to two PCMCIA CA modules to decrypt various encrypted systems, such as Conax, CryptoWorks, Irdeto, NDS and Viaccess etc. Easy to use, low maintain cost and flexible factory optional make the CI 2010 the best choise for CATV digital headend system. |
 |
| FEATURES |
| • |
Fully comply with DVB-S/C/T and MPEG-2 MP@ML standards |
| • |
Up to 2 Common Interface slots (PCMCIA) that can support any encrypted systems on the market |
| • |
Switchable output between the two PCMCIA slots |
| • |
ASI Input factory optional |
| • |
TS loop through output for further decrypting |
| • |
CVBS video and balance stereo audio XRL output |
| • |
Transparent decryption ASI output or non-decryption output switch |
| • |
Friendly user interface |
| • |
Auto network or transponder search function and code stream information update |
| • |
Store up to 2000 channels |
| • |
Video PID and audio PID setup |
| • |
Support OSD teletext (DVB ETS 300 706) and caption function |
| • |
256 color OSD, support various languages |
| • |
EPG function, support PIG (Picture in Graphics) display |
| • |
Automatic PAL to NTSC conversion and vice-versa |
| • |
Software upgrade via RS-232 interface |
| • |
Automatic last channel memory |
|
|
| TECHNICAL SPECIFICATIONS |
|
| DVB-T COFDM demodulation |
Connector: IEC, female (7/8 MHz) or F female (6 MHz) input |
|
If loop through: Yes |
|
Frequency range: 470 ~ 862 MHz, 174 ~ 230 MHz |
|
Input impedance: 75 Ω unbalanced |
|
Digital signal input level: -75 ~ -20 dBmV |
|
Constallation: QPSK, 16-QAM, 64-QAM |
|
Tuner bandwidth: 8 MHz |
|
FFT mode: 2 K, 8 K |
|
Guard interval: 1/4, 1/8, 1/16, 1/32, off |
|
FEC code rate: 1/2, 2/3, 3/4, 5/6 and 7/8 |
|
| Audio XRL balance output |
2 x RCA (Left and right track) interface |
|
Audio output impedance: 600 Ω |
|
Audio output level: 0,6 V rms / 2 dB into 10 KΩ |
|
| BNC video output |
Video output interface: 75 Ω |
|
Video output bandwidth: 8 MHz |
|
Sync. amplitude tolerance: ±5 % (300 mV) |
|
Burst amplitude tolerance: ± 2 dB (300 mV) |
|
| AV (RCA) |
Audio RCA: 1 (left & right) connector, MPEG-1 layer I & II, Musiacam compression format |
|
Amplitude frequency response: ± 2 dB |
|
Audio dynamic range: > 80 dB |
|
Audio output impedance: 680 Ω |
|
Audio harmonic disortion ratio: < 0,2 % |
|
Audio S/N rate: > 80 dB |
|
L-R level difference: ± 1 dB |
|
| Video CVBS RCA x 2 connector |
MPEG-2 decompression |
|
Amplitude frequency response: ± 5 % |
|
Video format: 4:3, 16:9 / 720 x 576 @ PAL / 720 x 480 @ NTSC |
|
Video buffer: 64 Mbps SDRAM |
|
Video data rate: 15 Mbps (Max. burst rate: 228 Mbps) |
|
Video output level: 1 Vp-p ± 0,1 V |
|
Video S/N: > 54 dB |
|
| Front panel |
Digital LED display: 4 x LED to display current channel number |
|
CI PCMCIA module slot: 2 x slots |
|
Buttons: 8 buttons for full operation |
|
LED: 3 x LED for simple status monitoring |
|
|