|
Maximum AV 1022M PAL B/G A2 stereo modulator |
|
Product id: 7680 |
|
|
|
|
|
PRODUCT DESCRIPTION |
Maximum AV 1022 M an Agile Adjacent Modulator module is made with proprietary SAW filter that achieves the true VSB response and IF modulation signal processing. The spurious harmonics is less than -55 dB, and with outside channel filter, the spurious harmonic could be less than -70 dB. Both video and audio carries are PLL controlled to ensure accuracy and stability. RF amplification circuit realizes low non-linear distortion and high output level. It has the features of last channel memory and RF output level: max 100 dBμV; it also has the feature of high audio and video linearity. |
|
FEATURES |
• |
48 MHz to 870 MHz Agile Adjacent Modulation Output |
• |
PAL, NTST, SEACAM TV system Factory Optional |
• |
Mono, Stereo, Dual Audio mode selectable |
• |
High 100dBu V RF output level |
• |
Two PLL Synthesized Channel control |
• |
Programmed full band by MCU |
• |
Low spurious harmonic less than -60dB |
• |
Built-in High-grade SAW VSB filter assure ultimate performance |
• |
Video Pre-correction circuit for low DP, DG and C/L Delay |
|
|
TECHNICAL SPECIFICATIONS |
|
Output frequency |
48,25 ~ 860,25 MHz adjustable |
|
Frequency adjust step |
1 MHz |
|
Output level |
Max. 100 dBµV |
|
Output level attenuation |
0 ~ -18 dB (adjustable) |
|
Output impedance |
75 Ω |
|
TV system |
PAL, NTSC, SECAM factory optional |
|
Picture carrier accuracy |
≤ ± 5 KHz (VHF); ≤ 10 KHz (UHF) |
|
Spurious/harmonic reject |
≥ 55 dBc |
|
AV carrier ratio |
5,5 MHz: 12 dB; 5,742 MHz: 16 dB |
|
RF |
Output return loss ≥ 12 dB (VHF); ≥ 10 dB (UHF) |
|
Video |
Input level: 1,0 Vp-p @ 87,5 % modulation |
|
C/L delay: ≤ 45 ns |
|
S/N ratio: ≥ 45 dB |
|
Difference gain: ≤ 5 % |
|
Difference phase: ≤ 5° |
|
K2T: ≤ 4 % |
|
Frequency response: ≤ 2 dB |
|
Audio |
Input level: 0 dBu @ ± 50 KHz dev. |
|
S/N ratio: ≥ 55 dB |
|
Frequency response: ± 1,5 dB |
|
Harmonic disortion ratio: ≤ 1 % |
|
Audio de-emphasis: 50 µs |
|
|